Guangzhou Xiebin Import&Export Co., Ltd.
Technology,Explore and Innovate!!!
Add to Cart
Rear BBK For Audi RS4 RS3 With 380*28 mm Rotor 19inch 20inch Wheel Rear Brake Kit To Keep EBP Function
Audi RS4 RS3 2015+ year
It can be installed our front and rear brake kit
Electric handbrake
The original wheels do not need to add Spacers.
(If you are not sure,you can provide your car ET value to us and we can check it for you)
Orginal Brake Rotor Information
Front:
| Front Original Rotor Information | |
| Brake Rotor model | 21875 |
| Rotor Diameter | 370 mm |
| Rotor Hat Diameter | 112 mm |
| Central Hole Diameter | 65 mm |
| Disc Thickness | 34 mm |
| Minimum Disc Thickness | 32.4 mm |
| Total Height | 60 mm |
| Number of Positioning Holes | 5 |
| Disc type | Ventilation |
| Rear Original Rotor Information | |
| Brake Rotor model | 27057 |
| Rotor Diameter | 310 mm |
| Rotor Hat Diameter | 112 mm |
| Central Hole Diameter | 65 mm |
| Disc Thickness | 22 mm |
| Minimum Disc Thickness | 20 mm |
| Total Height | 48 mm |
| Number of Positioning Holes | 9 |
| Disc type | Ventilation |
1 Full kit included
2 x Calipers
2 x Discs
2 x Brake Lines
4 x Brake Pads
2 x Adapters( Brackets)
Hardwares
S4-EXPLORE 4 piston Big Brake Kit fit for Wheel Size
378*32mm 19inch
405*34mm 20inch
What is included in the brake package:
High performance radial mount calipers (Forged 6082)
2-pcs floating rotors with alloy hats (full-floating rotors available)
Teflon/stainless steel DOT compliant brake lines
Direct bolt-on caliper mounting brackets and bolts
Brake pads (Can also be purchased from other brands)
All necessary mounting hardware for direct bolt-on install
Package size:42*42*42cm
Piston material: Aluminum Alloy
Brake Pads
Material: Ceramic Graphite
Heat Resistant:0-500C
Friction Coefficient:0.49
Rotor (Disc+Center Hub)
craft: Forged
Plane Bounce:<0.03mm
Material:
1,Disc:High Carbon Iron
2,Center Hub: Aerial 6061 Aluminum Alloy
ROTOR SPECS:
2-piece floating rotors with 6061-T6 aerospace grade alloy hat.
Fully balanced from the factory
Rotor ring in FC30 cast iron with anti corrosion coating.
Drilled / slotted / drilled and slotted rotor ring available at no extra cost.
(We advise drilled for street and slotted only for track and race applications)
Curved vanes ventilation for optimal cooling.
Full-floating rotors use floating hardware with anti-rattle system (removable and rebuildable).
It provides a lower tendency to warp, less drag and wear as the rotor ring centers itself with the pads.
Available for 330mm rotors and bigger only.
The semi-floating rotor uses standard bolts instead and the rotor is fixed on the hat.
Custom rotor hat anodized color
Brackets/Adapters
Material: Aerial 6061 Aliminum Alloy
Craft: CNC
Brake Hose/Brake line
Material: Inside teflon, Braided Stainless steel mid layer ,Protective outer PVC weather proof shell
Our brake kit is supplied with a Goodridge Style Brake line kit with stainless lines; consisting of a PTFE inner and stainless steel braided outer to eliminate the spongy feel of original rubber hoses, provide superior resistance to corrosion, and offer consistent braking performance.
WARRANTY:
10 years on calipers casting, caliper parts, and seals.
2 years on mounting hardware and brackets.
Lifetime Warranty on brake lines. DOT approved
10,000km / 3 months on rotors.
The number of pots of the calipers will also play a role in term of pressure applied on the pads to make the contact as good as possible on the rotors. In order to fit the caliper on your original chassis, TEI Racing provides caliper brackets to position the calipers with your new braking system, making the perfect set up for your car brakes system.
Go fast and stop faster. TEI Racing Big Brake Kits provide you with serious braking power when you need it most. TEI Racing brake kits are offered for both the front and rear brakes with rotor sizes ranging from 285mm-405mm drilled or slotted or drilled and slotted, 2-6 piston Forged Monoblock aluminum caliper options, and custom colors. Stainless steel brake lines, brake pads, and all hardware are included for a direct bolt-on installation where no modifications are required.
TEI Racing Monoblock calipers are precision machined from aircraft quality billet aluminum and feature heavy duty aluminum pistons mated to temperature resistant seals. These high performance calipers are able to utilize a lightweight construction while providing dramatically increased braking performance. The rotors included in TEI Racing big brake kits features a two-piece design with drilled or slotted surfaces which help minimize fade and dissipate heat under the most extreme braking.
| TEI Racing Rotor Size | Minimum Inch Wheel Size |
| 285*24mm | 15inch wheels |
| 300*24mm | 16inch wheels or above |
| 300*28mm | 17inch wheels or above |
| 330*28mm | 17inch wheels or above |
| 345*28mm | 18inch wheels or above |
| 355*32mm | 18inch wheels or above |
| 378*32mm | 19inch wheels or above |
| 405*34mm | 20inch wheels or above |
Installation Info
Installation Time
(approx) 4 Hours
Difficulty Level:
Mechanical expertise or professional installation required.
Q1: How do I know if I need to add spcaers when I install your brake kit?
A1: You can tell us your car rim parameter and we check it for you.Normally,if your rim ET value is more than 38,you need to add the spacers.
Q2: After payment, when can I get the brake kit?
A2: For normal order,we need to take about 5-7 days to produce your brake kit.For the customzied order,we need to take about 10-15 days to finish the production.
As for the shipment time,7-12 days by express/25-45 days by sea transportation/5-15 days by air/25-35 days by train
If you dont have logistic agent in China,you can tell us your address and we check the shipment for you.
Q3: How can I pay?
A3: Bank Transfer,Paypel or Western Union.We also have online store on Alibaba or Aliexpress.You also can place the order by them.